← All simulations

Newton's Laws of Motion Simulation

Force, mass, acceleration and friction | Class 11 | JEE | NEET

Push Friction Normal force Weight Force between blocks (R)
Newton's laws Press Launch to push the box.
Quick examples:
The push
N
The block
kg
Surface and gravity
Simulation

Tip: drag the box sideways to push or pull it. The further you drag, the bigger the force. Let go to start. You can also use the left and right arrow keys to change the force, and the Space key to pause or resume.

Graph

Constant slope on the velocity graph means constant acceleration. A flat line means constant velocity.

What will happen?

Weight of block(s) (m g)-
Maximum static friction (μs N)-
Kinetic friction (μk N)-
With the force you set-

Live values

Time (t)0.00 s
Position (x)0.00 m
Velocity (v)0.00 m/s
Acceleration (a)0.00 m/s²
Applied force0.0 N
Friction force0.0 N
Net force (applied + friction)0.0 N
Normal force (N = m g)0.0 N
Momentum (p = m v)0.00 kg m/s
Kinetic energy0.00 J
Work done by the push0.00 J
Heat lost to friction0.00 J
Kinetic energyHeat lost to friction

Work done by the push = kinetic energy + heat lost to friction. Right is positive, left is negative.

Theory

Newton's first law (inertia): A body stays at rest, or keeps moving in a straight line at constant velocity, unless a net outside force acts on it.

Newton's second law: The net force on a body equals its mass times its acceleration.

Fnet = m a    or    a = Fnet / m

Newton's third law: If body A pushes body B, then B pushes A back with an equal and opposite force. The two forces act on different bodies, so they never cancel each other.

Friction on a flat floor (N = m g):

Static friction: fs ≤ μs N (it matches the push until the limit)
Maximum static friction: fs,max = μs N
Kinetic friction (while sliding): fk = μk N

If the push is bigger than μs N the block starts to slide, and then:

a = (F − μk m g) / m
v = u + a t    x = u t + ½ a t²
Work by the push = KE + heat lost to friction

Two blocks pushed together (same surface, total mass M = m1 + m2):

a = (F − μk M g) / M
Force between the blocks: R = m2 F / M

Key points:

Practice questions

Q1. A 10 kg block on a smooth (frictionless) floor is pushed with 50 N. Find its acceleration.

a = F / m = 50 / 10 = 5 m/s²

Q2. A 20 kg block is on a wooden floor (μs = 0.5, μk = 0.4, g = 9.8 m/s²). It is pushed with 80 N. Does it move? What is the friction force?

Maximum static friction = 0.5 × 20 × 9.8 = 98 N.
The push (80 N) is less than 98 N, so the block does not move.
Static friction = 80 N (equal to the push), so the net force is zero.

Q3. The same 20 kg block is now pushed with 150 N. Find its acceleration.

150 N is more than 98 N, so it slides.
Kinetic friction = 0.4 × 20 × 9.8 = 78.4 N
a = (150 − 78.4) / 20 = 3.58 m/s²

Q4. A 10 kg block on frictionless ice is pushed with 20 N for 3 s from rest, and then the push is removed. How far does it travel in the next 5 s?

a = 20 / 10 = 2 m/s². Speed after 3 s: v = 2 × 3 = 6 m/s.
After the push stops there is no force, so the speed stays 6 m/s (first law).
Distance in 5 s = 6 × 5 = 30 m

Q5. Blocks of 4 kg and 6 kg are on a smooth floor. A 50 N force pushes the 4 kg block, which pushes the 6 kg block. Find the acceleration and the force between the blocks.

a = 50 / (4 + 6) = 5 m/s²
The 6 kg block is pushed only by the 4 kg block: R = 6 × 5 = 30 N.
By the third law, the 6 kg block pushes back on the 4 kg block with the same 30 N.

Q6. The 20 kg block (μk = 0.4) is pushed with 150 N on the Moon (g = 1.62 m/s²). Find its acceleration.

Kinetic friction = 0.4 × 20 × 1.62 = 12.96 N
a = (150 − 12.96) / 20 = 6.85 m/s² (much more than on Earth, because friction is smaller)

Tip: Put these values in the controls above and check your answers in the simulation.