Show
Meters
Advanced
Build circuits with a battery, bulb, resistor and switch. On a phone the screen turns to landscape.
- Add a part: drag it from the left box onto the canvas (or just tap it). Drag a part back onto the left box to delete it.
- Connect: drag the end dot of one part onto the end dot of another. When the dots turn green, release. The parts are now joined.
- Change values: tap a part. A small box appears at the bottom to change its voltage, resistance, wire length and more.
- Switch: tap the switch lever to open or close it.
- Meters: open Options, drag a voltmeter or ammeter onto the circuit. Put the two voltmeter probes on two points. Put the ammeter on a wire or a part.
- Picture or Symbol: use the buttons under the left box to see real-looking parts or textbook circuit symbols.
Theory
Ohm's law: the current through a resistor is proportional to the voltage across it.
Series circuit (one path): the same current flows through every part. Voltages add up. A bigger total resistance gives a smaller current.
Parallel circuit (many paths): every branch has the same voltage. Currents add up. The total resistance is smaller than the smallest branch.
Kirchhoff's laws: the current entering a junction equals the current leaving it. The voltage rises and drops around a closed loop add up to zero.
Meters: an ammeter is placed in series (current flows through it). A voltmeter is placed in parallel across the part you want to measure.
Wire resistivity and internal resistance: real wires and batteries have a small resistance. With the sliders in Options you can see how a long thin wire, or a weak battery, makes the bulb dimmer.
Current direction: conventional current flows from the + terminal of the battery round to the − terminal. Electrons really move the opposite way.
Short circuit and fuse: if a wire joins the two battery terminals directly, a very large current flows. A fuse melts when the current crosses its rating, and that stops the current.
Practice questions
Q1. A 9 V battery is connected to a 10 Ω bulb. Find the current and the power.
I = V/R = 9/10 = 0.9 A. P = VI = 9 × 0.9 = 8.1 W.
Q2. A 12 V battery drives two resistors of 10 Ω and 20 Ω in series. Find the current and the voltage across each.
Rtotal = 30 Ω, I = 12/30 = 0.4 A. V1 = 0.4 × 10 = 4 V, V2 = 0.4 × 20 = 8 V.
Q3. Two resistors of 20 Ω each are in parallel across a 10 V battery. Find the total current.
Each branch: I = 10/20 = 0.5 A. Total current = 1 A. (Rtotal = 10 Ω.)
Q4. Three bulbs of 30 Ω are connected in parallel to a 6 V battery. What is the equivalent resistance and the battery current?
1/R = 3/30, so R = 10 Ω. I = 6/10 = 0.6 A.
Q5. A 10 Ω resistor is in series with a parallel pair of 10 Ω and 10 Ω. The battery is 15 V. Find the battery current.
The parallel pair is 5 Ω. Rtotal = 15 Ω. I = 15/15 = 1 A.
Q6. A 2 A fuse is in series with a 5 Ω resistor and a 12 V battery. Does the fuse blow?
I = 12/5 = 2.4 A, which is more than 2 A. Yes, the fuse blows.
Tip: build each circuit in the kit and check your answer with the ammeter and voltmeter.